Welcome to Legacy Ridge Turfgrass Maintenance. We hope that you find our blog to be informative and please feel free to ask any questions about the golf course. We will answer them as promptly as possible.
Showing posts with label Irrigation. Show all posts
Showing posts with label Irrigation. Show all posts

Wednesday, December 7, 2011

GPS

The course is still buried under 6 inches of snow and with the temps barely climbing above freezing for the next week, we are hunkered down working primarily indoors.  One of the projects we have been working on the last few days is our new irrigation map.  Our irrigation computer operates Rain Bird Cirrus, and one of its many features is a map which displays our irrigation components over a map of the golf course.  Since 1997 we have used a fairly basic map utilizing a hand drawn version of the golf course taken from our scorecard.


This version worked well for many years, but we could improve upon this map and accomplish a couple other things if we made a GPS based map.  Any course built in the last 12 years was likely GPS'd during the construction process.  We weren't one of those courses.

In working with the City's GIS department, we put together a plan to map and catalog ALL irrigation and drainage components, calculate yardages for sprinkler caps, and verify the actual size of all playable areas.  It sounds simple, but the last piece will be very valuable for future project estimating and pesticide and fertilizer planning and calculations.  All of the pictures are of #14 and #15.

Wish they took aerial photos in June, not March...
To start we borrowed a Trimble handheld data logger for basically the summer of 2010 and began collecting data.  The data collection process was completed outside of normal maintenance duties, so it took a better part of a season.  We mapped sprinklers, valves, electric valves, splice boxes, drain basins and cataloged each by type, size, brand, model, and date installed. 

Any and all traced areas can be quickly measured
 
The completed GIS map, the yellow dots are sprinklers with yardage, the red dots are front center and back of each green.  The yardage info can be displayed in a tighter extent, pretty handy for replacement purposes

The second portion of the project was to define/trace various areas of the course (ie greens, rough, bunkers, etc).  We completed this portion during the winter of 2010.  To bring the new map over to our irrigation software, we enlisted the help of Brian Keighin, Owner of Irrigation Technologies a local irrigation designer, consultant, expert.  With his knowledge of both ArcMap, Auto CAD and Cirrus he was able to help us take the data from GIS into Cirrus.  The result is an aerial photo with dots representing sprinklers in their exact location.  Not quite done yet...

The dots are just dots at this point, stations from the database still need to be added to make the map usable in Cirrus

Looks a little bare without the shading.

Completed map in Cirrus
The last piece of the project was to populate our Cirrus map from our database, which basically entails placing individual "stations" where they belong on the map and labeling them properly.  I have a dozen more stations to add and the map is completely finished.  A nice added feature we incorporated was to display the address of each home bordering the course so that when a homeowner voices a concern we can quickly identify where they live and address the problem properly. 

We want to thank Joe Simpson, Dave Murray and Sandy Malesky in Community Development for all of their help in making this happen.  They were great to work with and excellent in explaining things in layman's terms so we grass-guys could understand. 


Thursday, November 10, 2011

'Tis the season

In the last two weeks we have had two good snowstorms that dropped around 12" total, accompanied with some pretty cold nights.  Prior to the 1st storm we drained down our bridge crossings where the irrigation mainlines hang underneath, exposed to the elements.  We have four bridge crossings that we isolate and drain during very cold weather to prevent ice from building up in the lines.  Three of the crossings happen to be on holes 5 and 6, so we isolate those holes from the rest of the irrigation system, the other crosses the wetlands on hole #13, which is also isolated/drain from the rest of the system. 

On Monday we began draining down and blowing out the outlying areas including the clubhouse and entrance areas.  The process of blowing out is pretty straight forward if you understand the layout of your system.  We connect a 185 compressor set at 70psi as close to the water source as possible blowing water out of the mainline first. 


Once the mainline is clear we run each electric valve until it blows only air, working away from the compressor until the majority of the water is clear.  We usually run through each zone a second time to be sure all of the water has passed through.  Blowout of the outlying areas typically takes about one day.  This year we had a little extra time, so we blew out the entire driving range, and area that typically receives the least irrigation this time of the year.      


 

We irrigate the entrance to Legacy Ridge parkway at 104th and 112th including some medians in between.  When the course was built in 1993, there were no homes around the course but the entrance areas had to be landscaped to facilitate the development of the neighborhood.  The majority of landscaped areas along "the parkway" are maintained by HOA contractors and irrigated with direct connections to the reclaimed system.  For whatever reason, the entrance areas remain connected to our system.      

We typically wait until a little later in the year to blowout the on-course irrigation, depending on the weather.  It's a double edge sword, if we blowout too early the weather can dry out and the need to pressure back up arises.  It's also possible to wait too long to blowout, the sprinklers can freeze and crack and blowout will no longer effectively remove water from the lines. 

Sunday, June 12, 2011

H2O

It is that time of year again when many of us spend our days behind a hose, watering "hot spots" throughout the course.  Instead of blindly overwatering to prevent isolated dry spots, we supplement our nighttime irrigation with handwatering.  It saves an enormous amount of water over a season and ensures that playing conditions are anything but soggy.   

This winter we purchased a hose reel from one of our vendors and with some input from a few of us, Jim modified an old greens mower trailer so we can tow the reel around with any of our carts.  He mounted a roof to shield 150' of 1" hose from the sun.  The electric motor that rewinds the hose is actually powered by the sun via a solar panel mounted on the roof.  All together it's a pretty sweet little rig, thanks once again to Jim for his ingenuity and quality craftsmanship.  
  
 
Though it's labor intensive, handwatering offers the best opportunity to put water exactly where we want it.  As we are constantly adjusting our system and improving our uniformity, there are still many areas where coverage is still lacking.


In a given round of golf, you may encounter a few staff members out with the reel trailer or with hoses watering hot spots throughout the course. As always they will move out of your way as best they can, please just make sure that they see you before proceeding. Golf ball technology is ever improving, but they still REALLY hurt when they hit you...

Thursday, June 2, 2011

THE Vibratory Plow

Today we "plowed" through some small irrigation improvements that we have been dreaming of for some time. There were a few spots around the course where we were lacking station wires for additional sprinklers, so we decided to rip in the wires with a small pipe puller.  This particular machine is capable of 12" depth max, which isn't suitable for most irrigation projects we do here, but for ripping in wires in out of play areas it works just fine.  While we had the machine, we ripped in a bunch of poly lines for future additions.  The pipe can function as a sleeve for wires or can be saddled with small sprinklers operated by an electric valve.  Overall it went pretty well and we pulled about 1300 ft of poly today. 


This little guy maneuvers quite well in tight areas and certainly eliminates a lot of the aches and pains of open trenching.  It is however limited by rock and tree roots, which have to be chopped out and removed in order to continue.
       

The majority of our irrigation system is made up of PVC pipe 2" and larger, but small areas where large sprinklers aren't an option,  poly pipe offers and easy and economical solution.  We will complete each of these projects as time and budget allow, but in the meantime the pipe will remain buried and the small slit left behind should heal with a little sand and seed and more wheel packing.  We will talk more about some of our improvements later this summer after some of they have been completed.         


Saturday, April 16, 2011

Out with the Old, In with the New

There is something about watching water run in the morning that gets our blood pumping and readies us for the growing season.
 

Our irrigation system here at Legacy Ridge is going on 18 years old now and is starting to show it's age in some ways.  One of the problems with an aging system is a loss of distribution uniformity due to wear.  Our system is comprised mostly of full-circle, brass impact style sprinklers made by Rain Bird. In their day they were the best thing going for double and triple row irrigation.  Today, they have been replaced with plastic, "closed case rotor" sprinklers that are much cheaper to manufacture and significantly less durable in our opinion.    



Each sprinkler has two distinct nozzles, a "range" nozzle and a "drive" nozzle.  The range nozzle produces the large stream, irrigating a doughnut shape area around the sprinkler.  The drive nozzle actually makes the sprinkler turn, and irrigates the area inside the range or nearer the sprinkler.  Generally, the drive nozzle wear is more apparent, resulting in a green ring around the sprinkler with drier turf surrounding.



Once we have replaced the two worn nozzles and adjusted the spring tension, these sprinklers should perform as though they were new.  Our hope is to refurbish all 1000 or so 51 DRs to near-new condition to extend the life and efficiency of our system.  As environmental stewards, we aim to reduce our water consumption to only what is absolutely neccesary to provide firm playing conditions and maintain a healthy stand of turf for our guests to enjoy.      


If we can refurbish our current sprinkler system with minor upgrades like nozzles and save a few thousand gallons a night.  In a year we could realize thousands of dollars in savings that can be used for other improvements around the course.  We will talk more about irrigation as we the warm weather approaches, when our irrigation practices and system are put to the test.